Table of Contents
Advertisement
Table 211 ipv6 address Commands (continued)
COMMAND
ipv6 address default-gateway
<gateway-ipv6-address>
no ipv6
no ipv6 address <ipv6-
address>/<prefix>
no ipv6 address <ipv6-
address>/<prefix> eui-64
no ipv6 address autoconfig
no ipv6 address default-
gateway
no ipv6 address dhcp client
no ipv6 address dhcp client
option
show ipv6
default-management <in-band|out-
of-band>
restart ipv6 dhcp client vlan <1-
4094>
Chapter 55 IPv6
DESCRIPTION
Sets the default gateway for the VLAN. When an
interface cannot find a routing information for a
frame's destination, it forwards the packet to
the default gateway.
Disables IPv6 in this VLAN.
Removes a specified static global address.
Removes a specified static global address
whose interface ID was generated using the
EUI-64 format.
Disables IPv6 address autoconfiguration in this
VLAN.
Removes the default gateway address for this
VLAN.
Disables the DHCP client feature in this VLAN.
Sets the OLT to not obtain the DNS server
information from the DHCP server.
Displays IPv6 settings in all VLANs on the OLT.
Sets through which traffic flow (in-band or out-
of-band) the OLT sends packets originating from
itself (such as SNMP traps) or packets with
unknown source.
IP interfaces that can be accessed
in-band:
through GE-1 ~ GE-6 uplink port or OLT PON, GE
ports in GE line card. These are the ports for
regular customer services.
out-of-band:
accessed through the management port. The
port is not used for regular customer service.
Sets the OLT to send a release message for the
assigned IPv6 address to the DHCP server and
start the DHCP message exchange again.
OLT2406 User's Guide
432
IP interfaces that can be
M
P
C
13
C
13
C
13
C
13
C
13
C
13
C
13
C
13
E
0
C
13
E
13
Advertisement
Table of Contents
Troubleshooting
