Table of Contents
Advertisement
Each field is described in the following table.
Table 116 Advanced Applications > PON DDMI
LABEL
Transceiver Information
Port
Vendor
Part Number
SN
Revision
Date Code
Transceiver
Current
High Alarm Thres.
High Warn Thres.
Low Warn Thres.
Low Alarm Thres.
Temperature (C)
Voltage (V)
TX Bias (mA)
TX Power (dbm)
RX Power (dbm)
ONT DDMI
ONT AID
RX Power (dbm)
32.2.1 ONT DDMI
Click a hyperlink in the ONT AID field in the Advanced Application > PON DDMI screen to view the ONT's
current transceiver status.
Figure 169 ONT DDMI
Chapter 32 PON DDMI
DESCRIPTION
Choose the GPON interface that you want to display from the drop-down list.
This displays the PON port that the transceiver is connected to.
This displays the vendor name of the optical transceiver.
This displays the part number of the optical transceiver.
This displays the serial number of the optical transceiver.
This displays the revision number of the optical transceiver.
This displays the date when the optical transceiver was manufactured.
This displays whether the connection to the optical network is up or down.
This displays the current status for each monitored DDMI parameter.
This displays the high value alarm threshold for each monitored DDMI parameter. An alarm
signal is reported to the OLT if the monitored DDMI parameter reaches this value.
This displays the high value warning threshold for each monitored DDMI parameter. A warning
signal is reported to the OLT if the monitored DDMI parameter reaches this value.
This displays the low value warning threshold for each monitored DDMI parameter. A warning
signal is reported to the OLT if the monitored DDMI parameter reaches this value.
This displays the low value alarm threshold for each monitored DDMI parameter. An alarm
signal is reported to the OLT if the monitored DDMI parameter reaches this value.
The transceiver's temperature in Celsius. The normal range is 0-70 degrees.
The transceiver's voltage in Volts. The normal range is 3.13-3.47 Volts.
The transceiver's bias current in mA. The normal range is 4-50 mA.
The transceiver's optical transmitting power in dBm. The normal range is 0.5 to 5 dBm. N/A
displays when a transceiver is not connected to the PON port.
The transceiver's optical receiving power in dBm. The normal range is -6 to -28 dBm. N/A
displays when a transceiver is not connected to the PON port.
This is the ONT's ID in the format: ont-<pon>-<ont>
This displays the ONT's optical receiving power in dBm.
OLT2406 User's Guide
282
Advertisement
Table of Contents
Troubleshooting
