Mac Address Commands; Mac Address Command Examples - ZyXEL Communications OLT2406 User Manual

88.2 MAC Address Commands

Use these commands to look at the MAC address table and to configure MAC address learning. The
OLT uses the MAC address table to determine how to forward frames.
Table 339 MAC Address Commands
COMMAND
show mac-aging-time
mac-aging-time <10-1000000>
show mac address-table all [<sort>]
show mac address-table count
show mac address-table port
<aid|T1|T2>
show mac address-table port
<aid|T1|T2> <sort>
show mac address-table static
show mac address-table vlan <vlan-
list> [<sort>]
show mac address-table mac <mac-
addr>
show mac address-table multicast
mac-flush [<port-num>]

88.3 MAC Address Command Examples

This example shows the current MAC address table.
OLT2406# # show mac address-table all
Port VLAN ID
GemFlow
CPU 1
N/A
ge-5-1
N/A
MAC Address
00:19:cb:13:57:25
4095 00:a0:c5:00:00:07
OLT2406 User's Guide
DESCRIPTION
Displays MAC learning aging time.
Sets learned MAC aging time in seconds.
Displays MAC address table. You can sort by
MAC address, VID or port.
sort: MAC, VID, or PORT.
Displays the total number of MAC addresses in
the MAC address table.
Displays the MAC address table for the specified
(trunk) port(s).
<aid|T1|T2>: <ge|msc|pon>-<slot>-
<port>,<T1|T2>
Displays the MAC address table for the specified
port(s). Sorted by MAC, Port or VID.
<aid|T1|T2>: <ge|msc|pon>-<slot>-
<port>,<T1|T2>
sort: MAC, VID, or PORT.
Displays the static MAC address table.
Displays the MAC address table for the specified
VLAN(s). Optionally, sorted by MAC, Port or VID.
sort: MAC, VID, or PORT.
Displays a specified MAC entry.
Displays the multicast MAC addresses learned
by the OLT.
Clears the MAC address table. Optionally,
removes all learned MAC address on the
specified port.
Type Uniport-AID
Static N/A
Dynamic N/A
635
M P
E 3
C 13
E 3
E 3
E 3
E 3
E 3
E 3
E 3
E 3
E 13