Broadcast Storm Control; Broadcast Storm Control Overview; Broadcast Storm Control Commands - ZyXEL Communications OLT2406 User Manual

Broadcast Storm Control

66.1 Broadcast Storm Control Overview

Use these commands to configure broadcast storm control on the OLT.
Broadcast storm control limits the number of broadcast, multicast and destination lookup failure (DLF)
packets the OLT receives per second on the ports. When the maximum number of allowable broadcast,
multicast and/or DLF packets is reached per second, the subsequent packets are discarded. Enable this
feature to reduce broadcast, multicast and/or DLF packets in your network. You can specify limits for
each packet type on each port.

66.2 Broadcast Storm Control Commands

The following table describes the related commands.
Table 243 Broadcast Storm Control Commands
COMMAND
storm-control
no storm-control
show interfaces config <aid>
bstorm-control
show storm-control counter
clear storm-control counter
interface port-channel <aid>
broadcast-limit
broadcast-limit <pkt/s>
multicast-limit
multicast-limit <pkt/s>
dlf-limit
dlf-limit <pkt/s>
C
DESCRIPTION
Enables traffic storm control on the OLT.
Disables traffic storm control on the OLT.
Displays the storm control status on the specified
port.
aid: slot-<slot> | <ge|msc|pon>-<slot>-
<port>
Displays the storm control counters of the
specified port.
Clears the storm control counters of the
specified port.
Enters the sub-command mode for configuring
the specified ports.
aid: <msc|ge|pon>-<slot>-<port>
Enables broadcast limits on the port.
Sets the number of broadcast packets the port
receives per second.
Enables multicast limits on the port.
Sets the number of multicast packets the port
receives per second.
Enables DLF limits on the port.
Sets the number of DLF packets the port
receives per second.
OLT2406 User's Guide
484
H A P T E R
66
M P
C 13
C 13
E 3
E 3
E 3
C 13
C 13
C 13
C 13
C 13
C 13
C 13