The following section lists the commands for this feature.
Table 347 Running Configuration Commands
COMMAND
show running-config
show running-config interface
port-channel <aid> [<options>
[<...>]]]
show running-config help
show running-config page
show running-config vlanAID
copy running-config interface
port-channel <aid> <aid>
[<options> [<...>]]
copy running-config help
copy running-config tftp <ip>
<remote-file>
erase running-config
erase running-config interface
port-channel <aid> [<options>
[<...>]]
erase running-config help
sync running-config
92.4 Running Configuration Command Examples
This example resets the OLT to the factory default settings.
OLT2406# erase running-config
OLT2406# write memory
Chapter 92 Running Configuration
DESCRIPTION
Displays the current configuration file. This file
contains the commands that change the OLT's
configuration from the default settings to the
current configuration.
Displays the current configuration that applies to
the specified port.
aid: <ge|msc|pon>-<slot>-<port>
Provides more information about the specified
command.
Displays the current configuration file page by
page.
Displays the current configuration file and lists
the port membership of each VLAN.
Clones (copies) the attributes from the specified
port to other port. Optionally, copies the
specified attributes only.
Provides more information about the specified
command.
Uses TFTP to back up the OLT's current
configuration file to the TFTP server at the IP
address you specify. Specify the name to use for
the copied file.
Resets the OLT to the factory default settings.
Resets the specified port to the factory default
settings and optionally on a per-feature
configuration basis.
Provides more information about the specified
command.
Uses the current configuration on the active
management switching card to update the
current configuration on the standby
management switching card.
OLT2406 User's Guide
644
M
P
E
3
E
3
E
3
E
3
E
3
E
13
E
13
E
13
E
13
E
13
E
13
E
13