Table of Contents
Advertisement
Table 133 Advanced Application > ONT Template > Uniport Queue (continued)
LABEL
Delete
Cancel
38.2.3 Uniport VLAN
Use this screen to configure UNI port VLAN flow settings. Click Uniport VLAN in the Advanced Application
> ONT Template screen to display the screen as shown.
You can also use VLAN stacking on the OLT. See
See
Section 6.5 on page 85
Figure 187 Advanced Application > ONT Template > Uniport VLAN
The following table describes the labels in this screen.
Table 134 Advanced Application > ONT Template > Uniport VLAN
LABEL
Active
Uniport AID
UNIVID
(SVID:CVID)
Chapter 38 ONT Template
DESCRIPTION
Click Delete to remove the entries with the Delete option selected.
Click Cancel to begin configuring the screen again.
for tutorials on how to use VLAN stacking on ONTs.
DESCRIPTION
Choose the GPON interface that you want the settings configured here to apply to from the first
drop-down list.
Choose the template that you want the settings configured here to apply to from the second
drop-down list.
Select this to enable the VLAN flow setting rule on the UNI port.
Select a UNI port on the ONT. The UNI ports are represented by the format: uniport-<pon>-<ont>-
<card>-<port>.
Enter the UNI Service provider VLAN ID (SVID) and Customer VLAN ID (CVID) (1~4094) of traffic on
the UNI port to which to apply the VLAN flow settings.
OLT2406 User's Guide
Chapter 24 on page 191
308
for more information.
Advertisement
Table of Contents
Troubleshooting
