Garp Configuration; Garp Commands Summary - ZyXEL Communications OLT2406 User Manual

Table 220 IEEE 802.1Q VLAN Terminology (continued)
VLAN PARAMETER
VLAN Port

56.8 GARP Configuration

Switches join VLANs by making a declaration. A declaration is made by issuing a Join message using
GARP. Declarations are withdrawn by issuing a Leave message. A Leave All message terminates all
registrations. GARP timers set declaration timeout values.

56.8.1 GARP Commands Summary

The following section lists the commands for this feature.
Table 221 GARP Commands Summary
COMMAND
show garp
garp join <100-65535> leave <200-
65535> leaveall <200-65535>
Chapter 56 VLAN
TERM DESCRIPTION
Port VID This is the VLAN ID assigned to untagged frames that this port
received.
Acceptable Frame You may choose to accept both tagged and untagged
Type incoming frames, just tagged incoming frames or just untagged
incoming frames on a port.
Ingress filtering If set, the OLT discards incoming frames for VLANs that do not
have this port as a member.
DESCRIPTION
Displays GARP information.
Configures GARP time settings (in milliseconds),
including the join, leave and leave all timers for
each port. Leave Time must be at least two
times larger than Join Timer, and Leave All Timer
must be larger than Leave Timer.
OLT2406 User's Guide
447
M P
E 3
C 13