Ip Source Guard Static Binding - ZyXEL Communications OLT2406 User Manual

Table 81 Advanced Application > IP Source Guard
LABEL
VID
Port

27.3 IP Source Guard Static Binding

Use this screen to manage static bindings for DHCP snooping and ARP inspection. Static bindings are
uniquely identified by the MAC address and VLAN ID. Each MAC address and VLAN ID can only be in
one static binding. If you try to create a static binding with the same MAC address and VLAN ID as an
existing static binding, the new static binding replaces the original one. To open this screen, click
Advanced Application > IP Source Guard > Static Binding.
Figure 134 Advanced Application > IP Source Guard > Static Binding
The following table describes the labels in this screen.
Table 82 Advanced Application > IP Source Guard > Static Binding
LABEL
MAC Address
IP Address
VLAN
Port
Add
Cancel
Clear
Index
MAC Address
IP Address
Lease
Chapter 27 IP Source Guard
DESCRIPTION
This field displays the source VLAN ID in the binding.
This field displays the port number in the binding. If this field is blank, the binding applies to all
ports.
DESCRIPTION
Enter the source MAC address in the binding.
Enter the IP address assigned to the MAC address in the binding.
Enter the source VLAN ID in the binding.
Specify the port(s) in the binding. If this binding has one port, select the first radio button and
enter the port number in the field to the right. If this binding applies to all ports, select Any.
Click this to create the specified static binding or to update an existing one.
Click this to reset the values above based on the last selected static binding or, if not
applicable, to clear the fields above.
Click this to clear the fields above.
This field displays a sequential number for each binding.
This field displays the source MAC address in the binding.
This field displays the IP address assigned to the MAC address in the binding.
This field displays how long the binding is valid.
OLT2406 User's Guide
226