Syslog Upload Setup - ZyXEL Communications OLT2406 User Manual

Figure 239 Management > Syslog > Syslog Server Setup
The following table describes the labels in this screen.
Table 182 Management > Syslog > Syslog Server Setup
LABEL
Syslog Server Setup
Active
Server Address
Log Level
Add
Cancel
Clear
Index
Active
IP Address
Log Level
Delete
Delete
Cancel

46.4 Syslog Upload Setup

Click Management > Syslog > Syslog Upload Setup in the navigation panel to display this screen. Use this
screen to set up the time when the file with log messages will be uploaded to an external syslog server.
You can also set up the login information on an external syslog server.
Chapter 46 Syslog Setup
DESCRIPTION
Select this check box to have the OLT send logs to this syslog server immediately when these
logs are generated. Clear the check box if you want to create a syslog server entry but not
have the device send logs to it (you can edit the entry later).
Enter the IPv4 address of the syslog server.
Select the severity level(s) of the logs that you want the device to send to this syslog server.
The lower the number, the more critical the logs are.
Click Add to save your changes to the OLT's run-time memory. The OLT loses these changes
if it is turned off or loses power, so use the Save link on the top navigation panel to save your
changes to the non-volatile memory when you are done configuring.
Click Cancel to begin configuring this screen afresh.
Click Clear to return the fields to the factory defaults.
This is the index number of a syslog server entry. Click this number to edit the entry.
This field displays Yes if the device is to send logs to the syslog server. No displays if the
device is not to send logs to the syslog server.
This field displays the IP address of the syslog server.
This field displays the severity level of the logs that the device is to send to this syslog server.
Select an entry's check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Click Delete to remove the selected entry(ies).
Click Cancel to begin configuring this screen afresh.
OLT2406 User's Guide
382