Garp Command Examples; Gvrp Commands - ZyXEL Communications OLT2406 User Manual

56.8.2 GARP Command Examples

In this example, the administrator looks at the OLT's GARP timer settings and decides to change them.
The administrator sets the Join Timer to 300 milliseconds, the Leave Timer to 800 milliseconds, and the
Leave All Timer to 11000 milliseconds.
OLT2406# show garp
GARP Timer
------------------------
Join Timer
Leave Timer
Leave All Timer
OLT2406# configure
OLT2406(config)# garp join 300 leave 800 leaveall 11000
OLT2406(config)# exit
OLT2406# show garp
GARP Timer
------------------------
Join Timer
Leave Timer
Leave All Timer

56.9 GVRP Commands

The following section lists the commands for this feature.
Table 222 GVRP Commands
COMMAND
show vlan1q gvrp
vlan1q gvrp
no vlan1q gvrp
interface port-channel <aid>
gvrp
no gvrp
Chapter 56 VLAN
:200
:600
:10000
:300
:800
:11000
OLT2406 User's Guide
448
DESCRIPTION
Displays GVRP settings.
Enables GVRP.
Disables GVRP on the OLT.
Enters config-interface mode for the specified
port(s).
aid: <msc|ge|pon>-<slot>-<port>
Enables this function to permit VLAN groups
beyond the local OLT.
Disable GVRP on the port(s).
M P
E 13
C 13
C 13
C 13
C 13
C 13