ZyXEL Communications OLT2406 User Manual page 693

Figure 292 Downlink Port Protection Switching
Traffic from
uplink
The following section lists the commands for this feature.
Table 367 Downlink Port Protection Switching Commands
COMMAND
show protect-switch pon status
switch-over pon <aid>
protect-switch pon pon-<slot>-
<port> pon-<slot>-<port>
Chapter 98 Port Protection Switching
Working path
Backup path
DESCRIPTION
Displays the current status of the downlink PON
port protection switching operation.
Triggers a PON port protection switch-over
operation.
aid: pon-<slot>-<pon>
Assigns the specified downlink PON ports as an
active and backup pair. You can configure
multiple pairs of PON ports, but each PON port
can only be in one pair at a time.
pon pon-<slot>-<port> is the active port, and
pon-<slot>-<port> is the standby port.
OLT2406 User's Guide
693
M P
E 3
E 13
C 13