Bandwidth Control; Overview; Bandwidth Control Commands - ZyXEL Communications OLT2406 User Manual

64.1 Overview

This chapter shows you how you can cap the maximum bandwidth using the bandwidth control
settings.

64.2 Bandwidth Control Commands

Bandwidth control means defining a maximum allowable bandwidth for out-going traffic flows on a
port.
The following table describes the related commands.
Table 241 Bandwidth Control Commands
COMMAND
bandwidth-control
no bandwidth-control
interface port-channel <aid>
bandwidth-limit cir <kbps>
bandwidth-limit cir <cr>
bandwidth-limit egress
bandwidth-limit egress <kbps>
bandwidth-limit pir <kbps>
bandwidth-limit pir <cr>
bandwidth-threshold egress
<kbps>

Bandwidth Control

DESCRIPTION
Enables bandwidth control on the OLT.
Disables bandwidth control on the OLT.
Enters the sub-command mode for configuring
the specified ports.
aid: <msc|ge|pon>-<slot>-<port>
Sets the ports' Committed Information Rate
(CIR) bandwidth limit in Kbps.
Enables the CIR bandwidth limit on the port.
Enables bandwidth limits for outgoing traffic on
the ports.
Sets the maximum bandwidth allowed for
outgoing traffic on the ports.
Sets the ports' Peak Information Rate (PIR)
bandwidth limit in Kbps.
Enables the PIR bandwidth limit on the ports.
Sets the interface's bandwidth rate threshold for
outgoing traffic.
The range of an XE port is from 0 to 10000000
Kbps.
The range of a GPON port is from 0 to 2500000
Kbps.
The range of a GE port is from 0 to 1000000
Kbps.
OLT2406 User's Guide
481
C
H A P T E R
64
M P
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13