Table of Contents
Advertisement
The following section lists the commands for this feature.
Table 341 MAC Forced Forwarding Commands
COMMAND
macff active <cr>
no macff active
vlan <1-4094>
macff subnet <ip>/<maskbits>
macff subnet <ip>/<maskbits>
[gateway <ip>]
no macff subnet <ip>/<maskbits> <cr> Removes the MACFF settings.
macff help
show macff config <cr>
show macff status
Chapter 89 MAC Forced Forwarding
DESCRIPTION
Enables MACFF (MAC Forced Forwarding) on
the OLT.
Disables MACFF.
Enters config-vlan mode for the specified VLAN.
Creates the VLAN, if necessary.
Enter the IP subnet of the hosts, to which this
MAC forced forwarding applies.
ip: Enter a subnet IP address of the hosts.
maskbits: Enter the number of bits for the
specified IP address's netmask. This determines
how many subscriber IP addresses should be
included in this rule. See
Notation
Use this command to have the OLT work as the
MACFF gateway.
Enter the IP subnet of the hosts, to which this
MAC forced forwarding applies.
ip: Enter a subnet IP address of the hosts.
maskbits: Enter the number of bits for the
specified IP address's netmask. This determines
how many subscriber IP addresses should be
included in this rule. See
Notation
gateway: Enter the IP address of the external
gateway to which you want to forward ARP
requests from devices belonging to this VLAN.
The OLT drops ARP replies from other devices
connected to the uplink port so they remain
hidden.
Use this command to have an external gateway
work as the MACFF gateway.
Provides more information about the specified
command.
Displays the MACFF configuration.
Displays the MACFF status.
OLT2406 User's Guide
638
Network Size
for details.
Network Size
for details.
M
P
C
13
C
13
C
13
C
13
and
C
13
and
C
13
C
13
E
13
E
13
Advertisement
Table of Contents
Troubleshooting
