Subnet Based Vlan Commands - ZyXEL Communications OLT2406 User Manual

incoming frames will be classified based on their source IP subnet and prioritized accordingly. That is,
video services receive the highest priority and data the lowest.
Figure 251 Subnet Based VLAN Application Example
172.16.1.0/24
VID = 100
Note: Subnet based VLAN applies to un-tagged packets and is applicable only when you use
IEEE 802.1Q tagged VLAN.

56.12 Subnet Based VLAN Commands

The following section lists the commands for this feature.
Table 224 Subnet Based VLAN Commands
COMMAND
show subnet-vlan
subnet-based-vlan
subnet-based-vlan dhcp-vlan-
override
subnet-based-vlan name <name>
source-ip <ip> mask-bits <mask-
bits> vlan <vlan-id> priority <0-7>
Chapter 56 VLAN
Tagged Frames
Untagged
Frames
192.168.1.0/24 10.1.1.0/24
VID = 300
VID = 200
DESCRIPTION
Displays subnet based VLAN settings on the OLT.
Enables subnet based VLAN on the OLT.
Sets the OLT to force the DHCP clients to obtain
their IP addresses through the DHCP VLAN.
Specifies the name, IP address, subnet mask,
VLAN ID of the subnet based VLAN you want to
configure along with the priority you want to
assign to the outgoing frames for this VLAN.
OLT2406 User's Guide
451
Internet
M P
E 3
C 13
C 13
C 13