ZyXEL Communications OLT2406 User Manual page 703

Table 371 PPPoE Intermediate Agent Commands (continued)
COMMAND
pppoe intermediate-agent
format-type gpon-option
<[format <1|2|3|4|5|6>]
[productname] [hostname]
[onuid] [uniport] [mac] [vlan]
[serialnumber]>
Chapter 102 PPPoE IA
DESCRIPTION
Specifies a string the OLT adds into the Agent
Circuit/Remote ID sub-option for PPPoE
discovery packets received on this port.
For example:
1. circuit-id <string>
2. remote-id <string>
3. gpon-option <[format <num>]
[productname] [hostname] [onuid] [uniport]
[mac] [vlan] [serialnumber]>
A. [format <num>]
B. [productname] [hostname] [onuid]
[uniport] [mac] [vlan] [serialnumber]
Format of circuit ID/remote ID:
3.A
Format 1 is "SYS_ID ETH RACK/SHELF/SLOT/
PONPORT/ONTID:UNIPORT.UNIVID"
Example: OLTLAB eth 1/1/12/04/127:1.1096
Format 2 is "SYS_ID ETH SHELF/SLOT/PONPORT/
ONTID/ONTCARD/UNIPORT:RACK.UNIVID"
Example: OLTLAB eth 1/05/01/2/1/1:1.451
Format 3 is "SYS_ID/SLOT/PONPORT/
ONTID:UNIPORT.UNIVID"
Example: OLTLAB/05/01/100:1.35
Format 4 circuit-id is "SYS_ID SHELF/SLOT/
PONPORT:NNISVID.SNISVID ONTID/SN"
Remote-id is not required
Example: circuit-id => OLTLAB 1/5/
1:1000.1000 10/5A59584535044326
Format 5 is "SYS_ID ETH SHELF/SLOT/PONPORT/
ONTID/ONTCARD/UNIPORT:RACK.SNISVID"
Example: OLTLAB eth 1/05/01/2/1/1:1.1000
Format 6 is "SYS_ID ATM RACK/SHELF/SLOT/
PONPORT:ONTID.UNIVID"
Example: OLTLAB atm 1/1/05/01:2.1096
3.B
"[productname] [hostname] [onuid] [uniport]
[mac] [vlan] [serialnumber]"
Example: OLT24XX OLT24XX UNIPORT 12/4/
127/1/1 0d45d20ee7d5 222 s220s5500336
OLT2406 User's Guide
703
M P
C 13