67.1 Port Mirroring Overview
Port mirroring allows you to copy a traffic flow to a monitor port (the port you copy the traffic to) in order
that you can examine the traffic from the monitor port without interference.
Use these commands to copy a traffic flow for one or more ports to a monitor port (the port you copy
the traffic to) so that you can examine the traffic on the monitor port without interference.
Note: Use the running configuration commands to look at the current mirror settings. See
Chapter 92 on page
67.2 Port Mirroring Commands
The following section lists the commands for this feature.
Table 245 Port Mirroring Commands
COMMAND
mirror-port
mirror-port <aid>
no mirror-port
show mirror
mirror-port vlan <vid|all>
interface port-channel <aid>
mirror
mirror dir
<ingress|egress|both>
no mirror
Chapter 67 Port Mirroring
C
Port Mirroring
643.
DESCRIPTION
Enables port mirroring on the OLT.
Specifies the monitor port (the port to which
traffic flow is copied) for port mirroring.
aid: <ge|msc|pon>-<slot>-<port>
Disables port mirroring on the OLT.
Displays mirror settings of the OLT.
Sets the mirrored VLAN of the monitored port.
: 1~4094
vid
: all VLANs
all
Enters config-interface mode for the specified
port(s).
aid: <msc|ge|pon>-<slot>-<port>
Enables port mirroring in the interface.
Enables port mirroring for incoming (ingress),
outgoing (egress) or both incoming and
outgoing (both) traffic.
Disables port mirroring on the port(s).
OLT2406 User's Guide
487
H A P T E R
67
M
P
C
13
C
13
C
13
E
3
C
13
C
13
C
13
C
13
C
13