The Ont Wan Screen - ZyXEL Communications OLT2406 User Manual

The following table describes the labels in this screen.
Table 146 Advanced Application > ONT Quick Setup > Unreg
LABEL
Index
ONT ID
SN
Password
Status
Template
Register
Apply
Cancel
Paging
Prev/Next

39.7 The ONT WAN Screen

Use this screen to display the WAN information of the ONTs. Click Wan in the Advanced Application >
ONT Quick Setup screen to display the screen as shown.
Figure 198 Advanced Application > ONT Quick Setup > Wan
The following table describes the labels in this screen.
Table 147 Advanced Application > ONT Quick Setup > Wan
LABEL
ONT AID
Wan ID
Status
Type
Link Status
Nat
Service Type
Vlan
Priority
Chapter 39 ONT Quick Setup
DESCRIPTION
Choose the GPON interface to show the unregistered ONTs connected to it from the drop-down
list.
This is the index number of an unregistered ONT.
This is the identifier of an ONT.
This displays the GPON serial number of the unregistered ONT.
This displays the GPON password of the unregistered ONT.
This displays the registration status of the ONT.
This displays the template that the unregistered ONT uses.
Select this to register the ONT.
Click Apply to save the changes.
Click Cancel to begin configuring the screen again.
Click Prev or Next to show the previous/next screen if all status information cannot be seen in one
screen.
DESCRIPTION
This is the identifier for the GPON interface.
This field displays the ONT's ID in the format: ont-<pon>-<ont>.
This field displays the WAN interface ID of the ONT.
This field displays whether the WAN interface is active or not.
This field displays the WAN encapsulation method.
This field displays whether the WAN connection is up or down.
This field displays whether NAT is enabled or not on the ONT.
This field displays the current encapsulation method.
This field displays the VLAN group that the ONT belongs to.
This field displays the priority level of the VLAN group.
OLT2406 User's Guide
324