Table of Contents
Advertisement
Figure 238 Management > Syslog Setup
The following table describes the labels in this screen.
Table 181 Management > Syslog Setup
LABEL
Syslog
Logging Type
Active
Facility
Level
Apply
Cancel
46.3 Syslog Server Setup
Click Management > Syslog > Syslog Server Setup to view the screen as shown next. Use this screen to
configure a list of external syslog servers.
Chapter 46 Syslog Setup
DESCRIPTION
Select Active to turn on syslog (system logging) and then configure the syslog setting
This column displays the names of the categories of logs that the device can generate.
Select this option to set the device to generate logs for the corresponding category.
The log facility allows you to send logs to different files in the syslog server. Refer to the
documentation of your syslog program for more details.
Select the severity level(s) of the logs that you want the device to send to this syslog server.
The lower the number, the more critical the logs are.
Click Apply to save your changes to the OLT's run-time memory. The OLT loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to
save your changes to the non-volatile memory when you are done configuring.
Click Cancel to begin configuring this screen afresh.
OLT2406 User's Guide
381
Advertisement
Table of Contents
Troubleshooting
