Figure 14 Internet Access Wizard Setup: Third Screen; Table 9 Internet Access Wizard Setup: Voice Configuration - ZyXEL Communications Prestige 2602HW Series User Manual

Prestige 2602HW Series User's Guide

Figure 14 Internet Access Wizard Setup: Third Screen

Table 9 Internet Access Wizard Setup: Voice Configuration

LABEL
Active
SIP Number
SIP Local Port
SIP Server Address
SIP Server Port
REGISTER Server
Address
REGISTER Server Port Enter the SIP register server's listening port for SIP in this field.
SIP Service Domain
Authentication User ID
66
DESCRIPTION
Select this check box to have the Prestige use this SIP account. Clear the
check box to have the Prestige not use this SIP account.
Enter your SIP number in this field (use the number or text that comes before
the @ symbol in a full SIP URI). You can use up to 95 ASCII characters.
Use this field to configure the Prestige's listening port for SIP. Leave this field
set to the default if you were not given a local port number for SIP.
Type the IP address of the SIP server in this field. It doesn't matter whether
the SIP server is a proxy, redirect or register server.
Enter the SIP server's listening port for SIP in this field. Leave this field set to
the default if your VoIP service provider did not give you a server port number
for SIP.
Enter the SIP register server's address in this field.
If you were not given a register server address, then enter the address
from the SIP Server Address field again here.
If you were not given a register server port, then enter the port from the
SIP Server Port field again here.
Enter the SIP service domain name in this field (the domain name that comes
after the @ symbol in a full SIP URI). You can use up to 127 ASCII Extended
set characters.
This is the user name for registering this SIP account with the SIP register
server. Type the user name exactly as it was given to you. You can use up to
95 ASCII characters.
Chapter 3 Wizard Setup