ZyXEL Communications OLT2406 User Manual page 575

• The second rule is between the | symbols. It has the PMG5318 dial a call when users dial a hash
symbol (#) followed by any number of digits from 0 to 9, an asterisks (*), any number of digits from 0
to 9, and the pound key twice (##).
• The third rule comes after the second | symbol. It has the PMG5318 dial a call when users dial the
pound key (#) followed by any number of digits from 0 to 9, an asterisks (*), and any number of
digits from 0 to 9.
OLT2406# config
OLT2406(config)# voip-sip-profile sip
OLT2406(config-voip-sip-prof)# registrar 192.168.21.10
OLT2406(config-voip-sip-prof)# proxy-service-addr 192.168.21.10
OLT2406(config-voip-sip-prof)# host-part-uri 192.168.21.10
OLT2406(config-voip-sip-prof)# exit
OLT2406(config)# voip-common-profile common
OLT2406(config-com-prof)# exit
OLT2406(config)# voip-dial-plan dial
OLT2406(config-dial-plan-prof)# content 1 X*.X.#|#X.*.X.##|#X.*.X.
OLT2406(config-dial-plan-prof)# exit
OLT2406(config)# exit
Set the slot containing the GPON card (slot 5) to use a GPON card and enable the slot.
4
OLT2406# config
OLT2406(config)# interface slot slot-5
OLT2406(config-slot)# cardtype gpon
OLT2406(config-slot)# no inactive
OLT2406(config-slot)# exit
OLT2406(config)# exit
Set the PON port's register method for how the OLT registers ONTs connected to the port (A in this
5
example) and the PON port's transceiver type (12 in this example). Then enable the PON port.
OLT2406# config
OLT2406(config)# interface olt pon-5-1
OLT2406(config-olt)# register-method A
OLT2406(config-olt)# transceiver 12
OLT2406(config-olt)# no inactive
OLT2406(config-olt)# exit
OLT2406(config)# exit
Configure the remote ONT's provisioning and bandwidth group settings. (When you configure "remote
6
ONT" settings, the OLT configures the ONT with those settings.)
• Slot 5, port 1, and sets the ONT's ID to 1.
• sn: serial number, 5A59584517035116 in this example.
• pa: password, 44454641554C54000000 in this example.
• Enable the ONT.
• bwgroup: number 1 in this example.
• usbwprofname: this example uses the 100m bandwidth profile for upstream traffic.
• dsbwprofname: this example uses the 100m bandwidth profile for downstream traffic.
Chapter 78 VoIP
OLT2406 User's Guide
575