The following section lists the commands for the ingress checking feature. Enable or disable VLAN ingress
checking on each port individually via the ingress-check command in the config-interface mode.
Table 217 Ingress Check Commands
COMMAND
interface port-channel <aid>
ingress-check
no ingress-check
The following section lists the commands for the VLAN monitor counter feature. You can display the
monitor counter for all or a specified VLAN.
Table 218 Monitor Counter Commands
COMMAND
show monitor-counter all
show monitor-counter <vlan-id>
clear interface <aid>
56.6.1 VLAN Command Examples
This example configures ports 1 to 5 as fixed and untagged ports in VLAN 2000.
OLT2406 (config)# vlan 2000
OLT2406 (config-vlan)# fixed 1-5
OLT2406 (config-vlan)# untagged 1-5
This example deletes entry 4 in the static VLAN table.
OLT2406 (config)# no vlan 4
Chapter 56 VLAN
DESCRIPTION
Enters config-interface mode for the specified
port(s).
aid: <msc|ge|pon>-<slot>-<port> | <
<msc|ge|pon>-<slot>-<port>&&-<port>
Enables ingress checking on the specified ports.
The OLT discards incoming frames for VLANs that
do not include this port in its member set.
Disables ingress checking on the specified ports.
DESCRIPTION
Displays all VLAN monitor counters.
Displays the VLAN monitor counter for the
specified VLAN.
Clears all statistics from the interface status.
aid: <ge|msc|pon>-<slot>-<port>
OLT2406 User's Guide
444
M
P
C
13
C
13
C
13
M
P
E
3
E
3
E
13