Dhcp Snooping Configure - ZyXEL Communications OLT2406 User Manual

2u temperature-hardened, 6-slot mini chassis gpon olt
Table of Contents

Advertisement

Table 83 Advanced Application > IP Source Guard > DHCP Snooping (continued)
LABEL
Last ignored bindings
counters
Binding collisions
Invalid interfaces
Parse failures
Expired leases
Unsupported vlans
Last ignored time
Total ignored bindings
counters
Binding collisions
Invalid interfaces
Parse failures
Expired leases
Unsupported vlans

27.5 DHCP Snooping Configure

Use this screen to enable DHCP snooping on the OLT (not on specific VLAN), specify the VLAN where the
default DHCP server is located, and configure the DHCP snooping database. The DHCP snooping
database stores the current bindings on a secure, external TFTP server so that they are still available after
a restart. To open this screen, click Advanced Application > IP Source Guard > DHCP Snooping >
Configure.
Chapter 27 IP Source Guard
DESCRIPTION
This section displays the number of times and the reasons the OLT ignored bindings the
last time it read bindings from the DHCP binding database. You can clear these
counters by restarting the OLT or using CLI commands. See the CLI Reference Guide.
This field displays the number of bindings the OLT ignored because the OLT already
had a binding with the same MAC address and VLAN ID.
This field displays the number of bindings the OLT ignored because the port number
was a trusted interface or does not exist anymore.
This field displays the number of bindings the OLT ignored because the OLT was unable
to understand the binding in the DHCP binding database.
This field displays the number of bindings the OLT ignored because the lease time had
already expired.
This field displays the number of bindings the OLT ignored because the VLAN ID does
not exist anymore.
This field displays the last time the OLT ignored any bindings for any reason from the
DHCP binding database.
This section displays the reasons the OLT has ignored bindings any time it read bindings
from the DHCP binding database. You can clear these counters by restarting the OLT
or using CLI commands. See the CLI Reference Guide.
This field displays the number of bindings the OLT has ignored because the OLT already
had a binding with the same MAC address and VLAN ID.
This field displays the number of bindings the OLT has ignored because the port number
was a trusted interface or does not exist anymore.
This field displays the number of bindings the OLT has ignored because the OLT was
unable to understand the binding in the DHCP binding database.
This field displays the number of bindings the OLT has ignored because the lease time
had already expired.
This field displays the number of bindings the OLT has ignored because the VLAN ID
does not exist anymore.
OLT2406 User's Guide
230

Advertisement

Table of Contents
loading

Table of Contents