Table of Contents
Advertisement
Table 264 Policy Commands (continued)
COMMAND
policy help
no policy <name>
no policy <name> inactive
clear hit-counter policy
clear hit-counter policy <name>
73.3 Policy Command Examples
This example creates a policy (highPriority) for the traffic flow identified via classifier VLAN3 (see the
classifier example in
ToS priority field (value 7) for VLAN3 packets.
OLT2406(config)# policy highPriority classifier VLAN3 tos 7 queue-action
prio-replace-tos
OLT2406(config)# exit
OLT2406# show policy highPriority
Policy highPriority:
Classifiers:
VLAN3;
Parameters:
VLAN = 1; Priority = 0; DSCP = 0; TOS = 7;
Egress Port = msc-1-1;
Mirror Port = msc-1-1;
Bandwidth = 0; Out-of-profile DSCP = 0;
Action:
Replace the 802.1 priority field with the IP TOS value;
Chapter 71 on page
507). This policy replaces the IEEE 802.1 priority field with the IP
OLT2406 User's Guide
519
DESCRIPTION
•
green-to-cosq: assign the incoming
packets marked as green via TRTCM (Two
Rate Three Color Marker) to a CoS (Class of
Service) queue. See
Two Rate Three Color
Marker Traffic Policing
for more information.
•
counter: enable or disable packet counting
for the policy.
•
logging: enable or disable packet logging
for the policy.
Provides more information about the specified
command.
Deletes the policy.
Enables a policy.
Clears the counters of dropped and hit packets
for all policies on the OLT.
Clears the counters of dropped and hit packets
for the specified policy.
M
P
C
13
C
13
C
13
C
13
E
13
E
3
Advertisement
Table of Contents
Troubleshooting
