Port Mirroring Command Examples - ZyXEL Communications OLT2406 User Manual

67.3 Port Mirroring Command Examples

This example enables port mirroring and copies outgoing traffic from ge port 4 on the card in slot 6 to
uplink port 3 on the MSC. Use "msc-1-<port>" for an uplink port ("msc-1-" applies to the active MSC no
matter which slot it is in).
OLT2406(config)# mirror-port
OLT2406(config)# mirror-port msc-1-3
OLT2406(config)# interface port-channel ge-6-4
OLT2406(config-interface)# mirror
OLT2406(config-interface)# mirror dir egress
This example displays the mirror settings of the OLT after you configured in the example above.
OLT2406# show mirror
Mirroring:
Monitor port:
Mirrored port: ge-6-4
Chapter 67 Port Mirroring
enable
msc-1-3
Ingress:
Egress: ge-6-4
Both:
OLT2406 User's Guide
488