Removing Management And Line Cards - ZyXEL Communications OLT2406 User Manual

2.4.1 Removing Management and Line Cards

Disconnect all cables from the card. See
1
cables.
Loosen the two thumbscrews holding the card.
2
Grasp the center of the front panel of the card with one hand and place the other hand under the card
3
to support it.
Slide the card out of the slot.
4
Figure 19 Loosening a Card's Thumbscrews
Figure 20 Pulling a Card's Ejector Levers
Chapter 2 Hardware Installation
Section 2.6 on page 50
OLT2406 User's Guide
48
for details on removing the fiber optic