Table of Contents
Advertisement
Chapter 18 Device Operation Report
Figure 157 Log & Report > Operation Report > Configuration Report (Group)
The following table describes the labels in this screen.
Table 138 Log & Report > Operation Report > Configuration Report
LABEL
Show by
Page Size
#
Device Name
Action Time
Device Type
Firmware
Version
Feature
Result
(Successful/
Total)
Admin
Show Detail
Toal Records
18.2.1 Configuration Report Details
Use this screen to look at the detailed status of an configuration operation. To open this screen,
click Log & Report > Operation Report > Configuration Report, and then click Show
Details next to the device.
282
DESCRIPTION
Select this to display the configuration operation list shown by devices or by
groups.
Select this from the list box to set up how many records you want to see in each
page.
This is the number of an individual entry.
This is available if you select showing by device. This displays the device name.
You can click the label to sort by this column.
This is available if you select showing by group. This field displays the date and
time the operation was requested.
This displays the device type. You can click the label to sort by this column.
This displays the firmware version the device is using.
This is available if you select showing by group. This field displays the settings that
are affected by the operation.
This is available if you select showing by group. This is the result that displays how
many operation were requested in total and how many operation in them were
successfully performed.
This field displays the total number of devices to which the operation was applied
successfully.
This field displays the name of the administrator who performed the operation.
Click this to open a screen where you can see detailed information.
This entry displays the total number of records on the current page of the list.
Vantage CNM User's Guide
Advertisement
Table of Contents
Troubleshooting
