Table of Contents
Advertisement
Figure 240 Management > Syslog > Syslog Upload Setup
The following table describes the labels in this screen.
Table 183 Management > Syslog > Syslog Upload Setup
LABEL
DESCRIPTION
Syslog Upload Setup
Syslog Upload
Select Active to upload the file with log messages to the external syslog server configured
below.
Upload Time
Enter the time that you want the OLT to upload the file with log messages.
Apply
Click Apply to save your changes to the OLT's run-time memory. The OLT loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to
save your changes to the non-volatile memory when you are done configuring.
Cancel
Click Cancel to begin configuring this screen afresh.
Clear
Click Clear to return the fields to the factory defaults.
Server Active
Select this to activate the syslog server.
Server Address
Enter the IPv4 address of the syslog server.
Username
Enter the username of the syslog server.
Password
Enter the password of the syslog server.
Filepath
Enter the location of the syslog server that you want the file with log messages to be
uploaded to.
Add
Click Add to save your changes to the OLT's run-time memory. The OLT loses these changes
if it is turned off or loses power, so use the Save link on the top navigation panel to save your
changes to the non-volatile memory when you are done configuring.
Cancel
Click Cancel to begin configuring this screen afresh.
Clear
Click Clear to return the fields to the factory defaults.
Index
This field displays the index number.
Active
This displays whether the entry of the syslog server settings is active or not.
IP Address
This displays the IP address of the syslog server.
Username
This displays the username of the syslog server.
Password
This displays the password of the syslog server.
Chapter 46 Syslog Setup
OLT2406 User's Guide
383
Advertisement
Table of Contents
Troubleshooting
