Table of Contents
Advertisement
Table 127 Advanced Application > OLT Registration
LABEL
DESCRIPTION
Register-
Select the method (A, C, C-autolock, or D) the OLT uses to register ONTs connected to the port.
Method
A: (used in this example) requires the serial number and password the ONT sends to match the ones
you configure on the OLT.
C: requires the physical layer operations and maintenance (PLOAM) password the ONT sends to
match what you configure on the OLT.
C-autolock: requires the serial number the ONT sends to match the one you configure on the OLT.
D: automatically registers the ONT and brings it into service without checking the serial number or
password. The ONT registered with format D will lose the template settings when it's not connected
to the OLT. If the ONT is discovered the next time, the OLT will apply the template according to the
settings configured in the Advanced Application > OLT Registration screen automatically.
E: automatically registers the ONT and brings it into service without checking the serial number or
password. The ONT registered with format E will keep the template settings even when the it's not
connected to the OLT. If the ONT is discovered the next time, it has the template settings already, so
the OLT won't apply the template again.
Choose method D or E to apply the selected ONT template to all ONTs this GPON interface registers.
For other registration methods, you can apply a different template for each ONT in the ONT Quick
Setup screen.
Transceiver
Select 12 (Hisense class C+ transceiver) for the type of the default transceiver the PON port uses. A
Hisense class C+ transceiver is provided along with the package.
ONT
Select this to enable the ONT template.
Template
Active
Template
Select the ONT template to use for the GPON interface. You can modify these templates in the
Advanced Application > ONT Template screen or manually using CLI commands.
Note: This field is grayed out when you select A, C, or C-autolock in the Register-Method
field.
Fec Active
Select this to enable the Forward Error Correction (FEC) feature. See
more information about FEC.
Ranging
Configure the maximum ranging distance for the GPON interface.
Distance
Add
Click Add to apply the settings to a GPON port.
Cancel
Click Cancel to clear the fields.
Clear
Click Clear to return the screen's settings to the defaults.
AID
This is the identifier for the GPON interface.
Register-
This displays the method (A, C, C-autolock, D, or E) the OLT registers ONTs connected to the port.
Method
Transceiver
This displays the type of transceiver (12) the PON port uses.
Template
This displays the ONT template to use for the GPON interface.
ONT
This displays whether the ONT template is enabled or not.
Template
Active
Fec Active
This displays whether the Forward Error Correction (FEC) feature is enabled or not.
Ranging
This displays the maximum ranging distance for the GPON interface.
Distance
Active
This displays whether the GPON interface settings for the GPON interface is active or not.
Delete
Select this for one or more profiles and click Delete to remove them.
*
Use this row to select all of the profiles for deletion.
Chapter 37 OLT Registration
OLT2406 User's Guide
297
Section 37.1.2 on page 295
for
Advertisement
Table of Contents
Troubleshooting
