ZyXEL Communications OLT2406 User Manual page 366

Table 175 SNMP Interface Traps (continued)
OPTION OBJECT LABEL
lldp lldpRemTablesChange
transceiver-ddm DDMIRxPowerEventOn
DDMITemperatureEventOn
DDMITxBiasEventOn
DDMITxPowerEventOn
DDMIVoltageEventOn
DDMIRxPowerEventClear
DDMITemperatureEventClear
DDMITxBiasEventClear
DDMITxPowerEventClear
DDMIVoltageEventClear
ploam ONTLOSiEventOn
ONTLOSiEventClear
ONTLOFiEventOn
ONTLOFiEventClear
ONTLOAMiEventOn
ONTLOAMiEventClear
ONTLCDGiEventOn
ONTLCDGiEventClear
ONTRDIiEventOn
ONTRDIiEventClear
Chapter 44 Access Control
OBJECT ID
1.0.8802.1.1.2.0.0.1
1.3.6.1.4.1.890.1.5.17.5.31.2.1
1.3.6.1.4.1.890.1.5.17.6.31.2.1
1.3.6.1.4.1.890.1.5.17.5.31.2.2
1.3.6.1.4.1.890.1.5.17.6.31.2.2
1.3.6.1.4.1.890.1.5.17.5.31.2.1
1.3.6.1.4.1.890.1.5.17.6.31.2.1
1.3.6.1.4.1.890.1.5.17.5.31.2.2
1.3.6.1.4.1.890.1.5.17.6.31.2.2
1.3.6.1.4.1.890.1.5.17.5.31.2.1
1.3.6.1.4.1.890.1.5.17.6.31.2.1
1.3.6.1.4.1.890.1.5.17.5.31.2.2
1.3.6.1.4.1.890.1.5.17.6.31.2.2
1.3.6.1.4.1.890.1.5.17.5.31.2.1
1.3.6.1.4.1.890.1.5.17.6.31.2.1
1.3.6.1.4.1.890.1.5.17.5.31.2.2
1.3.6.1.4.1.890.1.5.17.6.31.2.2
1.3.6.1.4.1.890.1.5.17.5.31.2.1
1.3.6.1.4.1.890.1.5.17.6.31.2.1
1.3.6.1.4.1.890.1.5.17.5.31.2.2
1.3.6.1.4.1.890.1.5.17.6.31.2.2
1.3.6.1.4.1.890.1.5.17.5.31.2.1
1.3.6.1.4.1.890.1.5.17.6.31.2.1
1.3.6.1.4.1.890.1.5.17.5.31.2.2
1.3.6.1.4.1.890.1.5.17.6.31.2.2
OLT2406 User's Guide
366
DESCRIPTION
The trap is sent when entries in the
remote database have any updates.
Link Layer Discovery Protocol (LLDP),
defined as IEEE 802.1ab, enables LAN
devices that support LLDP to
exchange their configured settings.
This helps eliminate configuration
mismatch issues.
This trap is sent when one of the
device operating parameters (such
as transceiver temperature, laser bias
current, transmitted optical power,
received optical power, and
transceiver supply voltage) is above
or below a factory set normal range.
This trap is sent when all device
operating parameters return to the
normal operating range.
This trap is sent when the LOSi (Loss of
signal for ONUi) is received.
This trap is sent when the LOSi (Loss of
signal for ONUi) is cleared.
This trap is sent when the LOFi (Loss of
frame of ONUi) is received.
This trap is sent when the LOFi (Loss of
frame of ONUi) is cleared.
This trap is sent when the LOAMi (Loss
of PLOAM for ONUi) is received.
This trap is sent when the LOAMi (Loss
of PLOAM for ONUi) is cleared.
This trap is sent when the LCDGi (Loss
of GEM channel delineation) is
received.
This trap is sent when the LCDGi (Loss
of GEM channel delineation) is
cleared.
This trap is sent when the RDIi (Remote
defect indication of ONUi) is received.
This trap is sent when the RDIi (Remote
defect indication of ONUi) is cleared.