86.1 Overview
This chapter describes how to check the OLT's hardware/system status and perform ping or traceroute
for troubleshooting.
86.2 Diagnostics Commands
Use these commands to check system logs, ping IP addresses or perform port tests.
Table 332 Diagnostic Commands
COMMAND
hardware-alarm-setting cpu-
utilization <1 - 100>
hardware-alarm-setting memory-
usage <1 - 100>
no hardware-alarm-setting cpu-
utilization
no hardware-alarm-setting memory-
usage
ping <ip|host-name> [in-band|out-
of-band] [size <0-1472>] [-t]
ping help
show alarm-status
show cpu-utilization
show hardware-alarm-setting
show hardware-monitor <C|F>
show memory
show system-information
Chapter 86 Diagnostics
C
Diagnostics
DESCRIPTION
Sets the CPU utilization alarm threshold.
Sets the memory usage alarm threshold.
Removes the CPU utilization alarm threshold
setting.
Removes the memory usage alarm threshold
setting.
Sends Ping packets to the specified Ethernet
device.
size <0-1472>: Specifies the size of the Ping
packet.
-t: Sends Ping packets to the Ethernet device
indefinitely. Press [CTRL]+C to terminate the
Ping process.
Provides more information about the specified
command.
Displays alarm status.
Displays the CPU utilization statistics on the OLT.
Displays the CPU and memory alarm thresholds.
Displays current hardware monitor information
with the specified temperature unit (Celsius C or
Fahrenheit F).
Displays the memory utilization statistics on the
OLT.
Displays general system information.
OLT2406 User's Guide
629
H A P T E R
86
M
P
C
13
C
13
C
13
C
13
E
0
E
0
E
0
E
0
E
13
E
0
E
0
E
0