ZyXEL Communications OLT2406 User Manual page 408

• This example creates a "1G" QoS bandwidth profile which sets the SIR to 1024 kbps and limits the
AIR to 2048 kbps and the PIR to 1000000 kbps. In this step's final output you can see some other
bandwidth profiles are already configured.
• QoS queues use bandwidth profiles to manage the bandwidth of individual traffic classes within
the bandwidth groups. This example creates a "voice" QoS bandwidth profile which sets the SIR to
128 kbps and limits the AIR and PIR both to 256 kbps. You could configure other bandwidth profiles
for traffic like Movies on Demand (MoD) and data.
OLT2406# config
OLT2406(config)# qos ingprof voip dot1p0tc 1 dot1p1tc 1 dot1p2tc 1 dot1p3tc 1
dot1p4tc 1 dot1p5tc 1 dot1p6tc 1 dot1p7tc 1
OLT2406(config)# qos bwprof 1G sir 1024 air 2048 pir 1000000
OLT2406(config)# qos bwprof voice sir 128 air 256 pir 256
OLT2406(config)# exit
OLT2406# show qos ingprof
Index Active Name
1 Yes DEFVAL
DOT1P3TC=1, DOT1P4TC=1, DOT1P5TC=1, DOT1P6TC=1, DOT1P7TC=1
2 Yes voip
DOT1P3TC=1, DOT1P4TC=1, DOT1P5TC=1, DOT1P6TC=1, DOT1P7TC=1
OLT2406# show qos Bwprof
Index Name
----- --------
1 0_0_100
2 0_0_1000
3 0_0_2400
4 0_0_30
5 0_0_50
6 DEFVAL
Configure the remote ONT's provisioning and bandwidth group settings. (When you configure "remote
5
ONT" settings, the OLT configures the ONT with those settings.) This example uses:
• Slot 6, port 1, and sets the ONT's ID to 101.
• sn: serial number, 5A59584549007102 in this example.
• pa: password, 10 ASCII characters (Or 20 hexadecimal characters), 44454641554C54000000 in this
example.
• bwgroup: Number 1-40 of the bandwidth group on this ONT you are creating to specify upstream and
downstream bandwidth profiles to limit the ONT's bandwidth. This example uses 1 because it is the first
bandwidth group the example configures for the ONT.
• usbwprofname: Bandwidth profile this bandwidth group applies to upstream traffic, 1G. Note, the
total SIR bandwidth reserved for the ONTs on a PON cannot exceed the PON's bandwidth.
• dsbwprofname: Bandwidth profile this bandwidth group applies to downstream traffic, 1G. Note,
the total SIR bandwidth reserved for the ONTs on a PON cannot exceed the PON's bandwidth.
Then enable the ONT and check the ONT's registration status and bandwidth group information.
Chapter 53 Provisioning User Interfaces
Ustype SIR AIR
------ ---- ----
4 0 0
4 0 0
0 0 0
4 0 0
4 0 0
5 1024 1024
OLT2406 User's Guide
408
Value
DOT1P0TC=1, DOT1P1TC=1, DOT1P2TC=1,
DOT1P0TC=1, DOT1P1TC=1, DOT1P2TC=1,
PIR
-------
100032
1000000
2400000
30016
49984
2048