Table of Contents
Advertisement
42.4 Configuring DHCP VLAN Settings
Use this screen to configure your DHCP settings based on the VLAN domain of the DHCP clients. Click IP
Application > DHCP in the navigation panel, then click the VLAN link In the DHCP Status screen that
displays.
See
Section 27.10.1.4 on page 243
82 settings in different screens.
Note: You must set up a management IP address for each VLAN that you want to configure
DHCP settings for on the OLT. See
this.
Figure 208 IP Application > DHCP > VLAN
The following table describes the labels in this screen.
Table 158 IP Application > DHCP > VLAN
LABEL
VID
DHCP Status
Chapter 42 DHCP
for more information about the configuration order for DHCP option
DESCRIPTION
Enter the ID number of the VLAN to which these DHCP settings apply.
Select Server to have the OLT act as a DHCP server.
Select Relay to have the OLT forward DHCP requests to the DHCP server.
OLT2406 User's Guide
Section 5.2 on page 74
338
for information on how to do
Advertisement
Table of Contents
Troubleshooting
