Table of Contents
Advertisement
44.1 Access Control Overview
This chapter describes how to control access to the OLT.
FTP is allowed one session. Telnet and SSH share five sessions. Up to five Web sessions (five different user
names and passwords) and/or limitless SNMP access control sessions are allowed.
Table 166 Access Control Overview
SSH
Share up to nine sessions
44.1.1 What You Can Do
• Use the Access Control screen
• Use the SNMP screen
• Use the Trap Group screen
be sent to each SNMP manager.
• Use the User Information screen
with managers using SNMP v3 and associate them to SNMP groups.
• Use the Logins screens
configurator at any one time.
• Use the Service Access Control screen
use to access the OLT.
• Use the Remote Management screen
"trusted computers" from which an administrator may use a service to manage the OLT.
44.2 The Access Control Main Screen
Use this screen to display the main screen.
Click Management > Access Control in the navigation panel to display the main screen as shown.
Figure 218 Management > Access Control
Telnet
FTP
One session
(Section 44.2 on page
(Section 44.3 on page
(Section 44.3.1 on page
(Section 44.3.2 on page
(Section 44.4 on page
OLT2406 User's Guide
C
H A P T E R
Access Control
Web
Up to five accounts
354) to display the main screen.
355) to configure your SNMP settings.
356) to specify the types of SNMP traps that should
357) to create SNMP users for authentication
358) to assign which users can access the OLT via web
(Section 44.5 on page
360) to decide what services you may
(Section 44.6 on page
361) to specify a group of one or more
354
SNMP
No limit
44
Advertisement
Table of Contents
Troubleshooting
