ZyXEL Communications OLT2406 User Manual page 615

Table 323 SNMP Server Commands (continued)
COMMAND
snmp-server version <v2c|v3|v3v2c>
snmp-server get-community
<property>
snmp-server set-community
<property>
snmp-server trap-community
<property>
snmp-server trap-destination <ip>
[udp-port <socket-number>]
[version <v1|v2c|v3>] [username
<name>]
no snmp-server trap-destination
<ip>
Chapter 85 Access Control
DESCRIPTION
Sets the SNMP version to use for communication
with the SNMP manager.
v2c: allows SNMPv2 read/write access.
v3: allows SNMPv3 read/write access.
v3v2c: allows SNMPv2 and SNMPv3 read/write
access.
Sets the get community. Only for SNMPv2c or
lower.
Sets the set community. Only for SNMPv2c or
lower.
Sets the trap community. Only for SNMPv2c or
lower.
Sets the IP addresses of up to four SNMP
managers (stations to send your SNMP traps to).
You can configure up to four managers.
Deletes the specified SNMP manager.
OLT2406 User's Guide
615
M P
C 13
C 13
C 13
C 13
C 13
C 13