Uni Port Cfm Mep Settings - ZyXEL Communications OLT2406 User Manual

This example shows the MAC limit setting on uniport-1-1 of ONT-5-1-3.
OLT2406 # show remote uniport uniport-5-1-3-1-1 mac-limit
Mac Limit Active : YES
Mac Limit Number : 128

96.4.8 UNI Port CFM MEP Settings

Use the cfm-mep command to configure a maintenance association end point on a UNI port.
Table 363 UNI Port CFM MEP Commands
LABEL
remote uniport <aid>
cfm-mep <1-8191> ma-index <ma-
index> priority <0-7>
cfm-mep help
no cfm-mep <cr>
show remote uniport <aid> cfm-mep
<cr>
DESCRIPTION
Configures UNI port settings.
aid: uniport-<slot>-<pon>-<ont>-<card>-
<port>
Configures IEEE 802.1ag CFM MEP for remote UNI
port.
mep-index: MEP's own identity in the MA. For a
given MA, each MEP ID must be unique
throughout the network defined by the MD. The
MEP ID is defined in the range 1-8191.
ma-index: Maintenance association index with
which the MEP is associated.
priority: CCM and CTM frames are
transmitted according to this specified IEEE
802.1p priority. The priority is also used in LTR
frames originating from this MEP.
Describes the cfm mep command.
Deletes the UNI port's CFM MEP configuration.
Displays the specified UNI port's CFM MEP
configuration.
aid: uniport-<slot>-<pon>-<ont>-<card>-
<port>
OLT2406 User's Guide
687
M P
C 13
C 13
C 13
C 13
E 13