Table of Contents
Advertisement
Table 213 ipv6 nd Commands (continued)
COMMAND
ipv6 nd other-config-flag
ipv6 nd prefix <ipv6-prefix>/
<prefix-length> <[valid-
lifetime <0-4294967295>]
[preferred-lifetime <0-
4294967295>] [no-autoconfig]
[no-onlink] [no-advertise]>
ipv6 nd prefix <ipv6-prefix>/
<prefix-length>
ipv6 nd ra interval minimum <3-
1350> maximum <4-1800>
ipv6 nd ra lifetime <0-9000>
ipv6 nd ra suppress
ipv6 nd reachable-time <1000-
2147483647>
no ipv6 nd dad-attempts
no ipv6 nd managed-config-flag
no ipv6 nd ns-interval
no ipv6 nd other-config-flag
Chapter 55 IPv6
DESCRIPTION
Configures the OLT to set the "Other stateful
configuration" flag (the O flag) to 1 in IPv6 router
advertisements, which means hosts use DHCPv6
to obtain additional configuration settings, such
as DNS information.
Sets the OLT to include the specified IPv6 prefix,
prefix length and optional parameters in router
advertisements for this VLAN.
valid-lifetime: sets how long in seconds the
prefix is valid for on-link determination.
preferred-lifetime: sets how long (in
seconds) that addresses generated from the
prefix via stateless address autoconfiguration
remain preferred.
no-autoconfig: indicates the hosts can not use
this prefix for stateless address
autoconfiguration.
no-onlink: indicates this prefix can not be used
for on-link determination.
no-advertise: sets the OLT to not include the
specified IPv6 prefix, prefix length and optional
parameters in router advertisements for this
VLAN.
Sets the OLT to include the specified IPv6 prefix
and prefix length in router advertisements for this
VLAN.
Specifies the minimum and maximum time
intervals at which the OLT sends router
advertisements for this VLAN.
Sets how long (in seconds) the router in router
advertisements can be used as a default router
for this VLAN.
Sets the OLT to not send router advertisements
and responses to router solicitations for this
VLAN.
Specifies how long (in milliseconds) a neighbor is
considered reachable for this VLAN.
Resets the number of the DAD attempts to the
default settings (3).
Configures the OLT to set the "managed
address configuration" flag (the M flag) to 0 in
IPv6 router advertisements, which means hosts
do not use DHCPv6 to obtain IPv6 stateful
addresses.
Resets the time interval between retransmissions
of neighbor solicitations to the default setting
(3000 milliseconds).
Configures the OLT to set the "Other stateful
configuration" flag (the O flag) to 0 in IPv6 router
advertisements, which means hosts do not use
DHCPv6 to obtain additional configuration
settings, such as DNS information.
OLT2406 User's Guide
434
M
P
C
13
C
13
C
13
C
13
C
13
C
13
C
13
C
13
C
13
C
13
C
13
Advertisement
Table of Contents
Troubleshooting
