Table of Contents
Advertisement
Table 71 Advanced Application > Multicast > Multicast Setting > IGMP Snooping VLAN (continued)
LABEL
Index
Name
VID
Delete
Delete
Cancel
25.3.2 Mcast Channel
Use this screen to configure a GPON client multicast channel. Click Advanced Application > Multicast >
Multicast Setting in the navigation panel. Click the Mcast Channel link to display the screen as shown.
Figure 123 Advanced Application > Multicast > Multicast Setting > Mcast Channel
The following table describes the labels in this screen.
Table 72 Advanced Application > Multicast > Multicast Setting > Mcast Channel
LABEL
Mcast-Channel
Active
Name
start-group-ip
end-group-ip
vlan
pbit
Chapter 25 Multicast
DESCRIPTION
This is the index number of the IGMP snooping VLAN entry in the table. Click on an index
number to view more details or change the settings.
This field displays the descriptive name for this VLAN group.
This field displays the ID number of the VLAN group.
Select an entry's check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Check the entry(ies) that you want to remove, then click the Delete button.
Click Cancel to clear the check boxes.
DESCRIPTION
Select this to have the settings configured here take effect.
Enter a descriptive name for the entry.
Specify the beginning IP address of the multicast IP address range. The range of addresses
must be between 224.0.0.0 and 239.255.255.255.
Specify the ending IP address of the multicast IP address range. The range of addresses must
be between 224.0.0.0 and 239.255.255.255.
Enter the VLAN ID; the valid range is between 1 and 4094.
Select the IEEE 802.1p priority level to add to the untagged frames of this multicast channel.
OLT2406 User's Guide
206
Advertisement
Table of Contents
Troubleshooting
