ZyXEL Communications OLT2406 User Manual page 709

These commands assign an identifier-string string, option, and delimiter for the circuit ID string.
OLT2406#config
OLT2406(config)#pppoe intermediate-agent format-type access-node-identifier string
<string>
Note: The default access-node-identifier string is OLT2406.
Table 372 Access Loop Identification Info
ACCESS LOOP IDENTIFICATION INFO
circuit-id info
remote-id info
The OLT handles PPPoE discovery-stage packets as follows:
• The OLT adds information to a PADI or PADR packet received from a non-trusted port and forwards it
to a trusted port.
• The OLT drops a PADO or PADS packet received from a non-trusted port.
• The OLT forwards a PADI or PADR packet received from a trusted port to all trusted ports.
• In other cases besides those described above, the OLT forwards PPPoE discovery-stage packets.
Chapter 102 PPPoE IA
DESCRIPTION
The circuit ID string with specified port and vlan (user
defined)
The circuit ID string with specified port (user defined)
<identifier-string>/<slot>/<port>/<vlan>
<access-node-identifier string> eth <slot>/
<port>:<vlan>
The circuit ID string with specified port and vlan (user
defined)
The circuit ID string with specified port (user defined)
PPPoE Client's MAC address
OLT2406 User's Guide
709
or
or
or
or
or