Table of Contents
Advertisement
Table 74 Advanced Application > Multicast > Multicast Setting > MVR > Group Configuration
LABEL
DESCRIPTION
Add
Click this to create a new entry.
This saves your changes to the OLT's run-time memory. The OLT loses these changes if it is turned
off or loses power, so use the Save link on the top navigation panel to save your changes to the
non-volatile memory when you are done configuring.
Cancel
Click Cancel to begin configuring this screen afresh.
MVLAN
This field displays the multicast VLAN ID.
Name
This field displays the descriptive name for this setting.
Start Address
This field displays the starting IP address of the multicast group.
End Address
This field displays the ending IP address of the multicast group.
Delete All
To delete the profile(s) and all the accompanying rules, select the profile(s) that you want to
remove, then click the Delete button. You can select the check box in the table heading row to
select all profiles.
Delete Group
To delete a rule(s) from a profile, select the rule(s) that you want to remove, then click the Delete
button.
Delete
Select the entry(ies) that you want to remove, then click the Delete button to remove the
selected entry(ies) from the table.
If you delete a multicast VLAN, all multicast groups in this VLAN will also be removed.
Cancel
Select Cancel to clear the checkbox(es) in the table.
Chapter 25 Multicast
OLT2406 User's Guide
213
Advertisement
Table of Contents
Troubleshooting
