54.1 Overview
This chapter introduces the basic setting commands of the OLT. This includes system configuration,
monitoring, date and time settings, alarm, switch, and IP settings, and OLT slot and management/line
card port setup.
54.2 System Command
Use this command to configure the OLT's system commands.
Table 192 System Commands
COMMAND
hostname <name_string>
show ignored-config
show logging
clear logging
show cmd-logging
clear cmd-logging
logout
54.3 Multi-login Command
Use the command to display information for multiple administrator logins on the OLT.
Table 193 Multi-login Command
COMMAND
show multi-login
C
Basic Settings
DESCRIPTION
Sets the system's name for identification
purposes.
name_string: 1-64 printable characters. Spaces
are allowed if you enclose the string in double
quotation marks ("").
When the OLT's firmware is upgraded from
version 4.00 to 4.02, some commands won't be
executable.
Uses this command to display the commands
that are not executable.
Displays the system's logs.
Clears the system logs.
Displays the logs of commands that were used.
Clears the logs of commands that were used.
Exits from the system.
DESCRIPTION
Displays multi-login information.
OLT2406 User's Guide
413
H A P T E R
54
M
P
C
13
E
3
E
3
E
13
E
3
E
3
E
0
M
P
E
3