ZyXEL Communications OLT2406 User Manual page 147

Figure 93 Advanced Application > Bandwidth Control
The following table describes the related labels in this screen.
Table 44 Advanced Application > Bandwidth Control
LABEL DESCRIPTION
Active Select this check box to enable bandwidth control on the OLT.
Port This field displays the port number. * means all ports.
* Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use this row first to set the
common settings and then make adjustments on a port-by-port basis.
Note: Changes in this row are copied to all the ports as soon as you make them.
Ingress Rate Specify the maximum bandwidth allowed in kilobits per second (Kbps) for the incoming traffic flow
on a port.
Note: Ingress rate bandwidth control applies to layer 2 traffic only.
Active Select this check box to activate commit rate limits on this port.
Commit Specify the guaranteed bandwidth allowed in kilobits per second (Kbps) for the incoming traffic
Rate
flow on a port. The commit rate should be less than the peak rate. The sum of commit rates cannot
be greater than or equal to the uplink bandwidth.
Active Select this check box to activate peak rate limits on this port.
Peak Rate Specify the maximum bandwidth allowed in kilobits per second (Kbps) for the incoming traffic flow
on a port.
Active Select this check box to activate peak rate limits on this port.
Chapter 15 Bandwidth Control
OLT2406 User's Guide
147