ZyXEL Communications OLT2406 User Manual page 480

Table 240 show mstp instance (continued)
LABEL
RootMaxAge
RootHelloTime
RootForwardDelay
BridgeMaxAge
BridgeHelloTime
BridgeForwardDelay
ForceVersion
TransmissionLimit
CIST_RRootID
CIST_RRootPathCost
This example adds the OLT to the MST region MSTRegionNorth. MSTRegionNorth is on revision number 1. In
MSTRegionNorth, VLAN 3 is in MST instance 1, and VLAN 4 is in MST instance 2.
OLT2406# configure
OLT2406(config)# mstp
OLT2406(config)# mstp configuration-name MSTRegionNorth
OLT2406(config)# mstp revision 1
OLT2406(config)# mstp instance 1 vlan 3
OLT2406(config)# mstp instance 2 vlan 4
OLT2406(config)# exit
DESCRIPTION
This field displays the maximum time (in seconds) the root switch can wait without
receiving a configuration message before attempting to reconfigure.
This field displays the time interval (in seconds) at which the root switch transmits a
configuration message.
This field displays the time (in seconds) the root switch will wait before changing states
(that is, listening to learning to forwarding).
This field displays the maximum time (in seconds) the OLT can wait without receiving a
configuration message before attempting to reconfigure.
This field displays the time interval (in seconds) at which the OLT transmits a
configuration message.
This field displays the time (in seconds) the OLT will wait before changing states (that is,
listening to learning to forwarding).
This field indicates whether BPDUs are RSTP (a value less than 3) or MSTP (a value
greater than or equal to 3).
This field displays the maximum number of BPDUs that can be transmitted in the interval
specified by BridgeHelloTime.
This field displays the unique identifier for the CIST regional root bridge, consisting of
bridge priority plus MAC address.
This field displays the path cost from the root port on this OLT to the CIST regional root
switch.
OLT2406 User's Guide
480