Table of Contents
Advertisement
93.1 Overview
Use these commands to configure settings on a line card port interface.
93.2 OLT Configuration Commands
This table lists commands for OLT settings.
Table 348 OLT Configuration Commands
COMMAND
interface olt <aid>
O7-state <sn>
bip-err-th <threshold>
exit
fec <0|1>
fec-corr-byte-th <threshold>
fec-corr-code-word-th <threshold>
fec-uncorr-code-word-th <threshold>
inactive
Chapter 93 OLT Configuration
C
OLT Configuration
DESCRIPTION
Sets OLT configuration for the specified
interface.
aid: pon-<slot>-<port>
Has the ONT with the specified serial number
enter Emergency Stop State (O7). Emergency
Stop State is a ONU state defined in ITUT G.983. In
this state, ONU will stop its transceiver output
until the OLT requests it to exit from the state.
: ONT serial number, 16 characters.
sn
Sets the threshold for Bit Interleaved Parity (BIP)
errors.
threshold
Leaves from the configuration commands.
Enables the Forward Error Correction (FEC)
feature.
0: disable
1: enable
Sets the FEC corrected byte threshold.
threshold
Sets the FEC corrected code word threshold.
threshold
Sets the FEC uncorrected code word threshold.
threshold
Inactivates the OLT PON port.
OLT2406 User's Guide
646
H A P T E R
: 0~4294967295
: 0~4294967295
: 0~4294967295
: 0~4294967295
93
M
P
C
13
C
13
C
13
C
13
C
13
C
13
C
13
C
13
C
13
Advertisement
Table of Contents
Troubleshooting
