ZyXEL Communications OLT2406 User Manual page 538

Table 275 igmp-snooping/multicast Commands (continued)
COMMAND
clear multicast port all
clear multicast port <port-list>
show igmpchannel counter
show igmp-snooping
show multicast port <cr>
show multicast port <ge|msc|pon>-
<slot>-<port>
show multicast port query
show multicast port receive
show multicast port report
show multicast port specific all
show multicast port specific
<ge|msc|pon>-<slot>-<port>
show multicast snooping-vlan
show multicast join-port
show multicast querier-source-IP
show multicast vlan
interface port-channel <aid>
igmp-immediate-leave
igmp-querier-mode
<auto|fixed|edge>
igmpchannel <uni-vid> active
<on|off> fullviewpkg
<packages> maxgroup <num>
maxmsg <num>
exit
show multicast mode-querier
show igmpchannel
Chapter 76 Multicast
DESCRIPTION
Removes all multicast port counters.
Remove the specified multicast port counter.
Displays the IGMP channel counter.
Displays the IGMP snooping settings.
Displays all multicast port counters.
Displays the specified multicast port counters.
Displays the port query packet counter.
Displays the port received packet counter.
Displays the port report packet counter.
Displays all port transmit packet counters.
Displays the specified port's transmit packet
counters.
Displays the IGMP snooping VLAN settings.
Displays multicast group member information.
Displays the IP address of the device which sent
the multicast queries.
Displays the multicast per VLAN counter.
Enters the sub-commands for configuring the
specified interface.
aid: <msc|ge|pon>-<slot>-<port>
Enables the OLT to remove this port from the
multicast tree when an IGMP version 2 leave
message is received on this port.
Select this option if there is only one host
connected to this port.
Enables IGMP query mode on the specified port. C
Configures IGMP channels limitations per VLAN.
: Activates/deactivates this IGMP
active
channel limitation.
fullviewpkg
members with full view privilege. That is, IGMP
clients can join groups in these package
members all the time. Use the mcast-channel
command to create the package members.
: <0-512>. The maximum number of
maxgroup
multicast groups a client can join concurrently.
: <0-255>. The maximum number of
maxmsg
IGMP reports a client can send per second.
Exits from interface port channel sub
commands.
Displays IGMP querier mode settings.
Displays IGMP channel's status.
OLT2406 User's Guide
538
: Configures a list of package
M P
E 3
E 13
E 13
E 3
E 3
E 3
E 13
E 13
E 13
E 13
E 13
E 3
E 3
E 3
E 13
C 13
C 13
13
C 13
C 13
E 3
E 3