Table of Contents
Advertisement
The settings in this tutorial are as the following.
Table 14 Tutorial: Settings in this Tutorial
HOST
DHCP Server (A)
DHCP Client (B)
DHCP Client (C)
Access the OLT through http://192.168.1.1 by default. Log into the OLT by entering the username
1
(default: admin) and password (default: 1234).
Go to Advanced Application > VLAN > Static VLAN, and create a VLAN with ID of 100. Add ports 10, 11
2
and 12 in the VLAN by selecting Fixed in the Control field as shown.
Deselect Tx Tagging because you don't want outgoing traffic to contain this VLAN tag.
Click Add.
Figure 45 Tutorial: Create a VLAN and Add Ports to It
Go to Advanced Application > VLAN > VLAN Configuration > VLAN Port Setting, and set the PVID of the
3
ports 10, 11 and 12 to 100. This tags untagged incoming frames on ports 10, 11 and 12 with the tag 100.
Chapter 6 Tutorials
PORT CONNECTED
10
11
12
OLT2406 User's Guide
77
VLAN
PVID
DHCP SNOOPING PORT TRUSTED
1 and 100
100
Yes
1 and 100
100
No
1 and 100
100
No
Advertisement
Table of Contents
Troubleshooting
