Table of Contents
Advertisement
39.5 The ONT Bandwidth Group Screen
Use this screen to display the ONT's bandwidth group settings. Click Bwgroup in the Advanced
Application > ONT Quick Setup screen to display the screen as shown.
Figure 196 Advanced Application > ONT Quick Setup > Bwgroup
The following table describes the labels in this screen.
Table 145 Advanced Application > ONT Quick Setup > Bwgroup
LABEL
ONT AID
ID
Status
Upstream
Downstream
Paging
Prev/Next
39.6 The Unregistered ONT Screen
Use this screen to display the unregistered ONTs connected to the GPON interface. Click Unreg in the
Advanced Application > ONT Quick Setup screen to display the screen as shown.
Figure 197 GPON > ONT Quick Setup > Unreg
Chapter 39 ONT Quick Setup
DESCRIPTION
Choose the GPON interface to see the maximum upstream and downstream bandwidth of the
ONT connected to it from the drop-down list.
This displays the ONT's ID in the format: ont-<pon>-<ont>.
This displays the bandwidth group ID number.
This displays the registration status of the ONT, and whether it's active or not.
This displays the maximum bandwidth allowed in kilobits per second (Kbps) for the out-going
traffic flow on an ONT.
This displays the maximum bandwidth allowed in kilobits per second (Kbps) for the incoming
traffic flow on an ONT.
Click Prev or Next to show the previous/next screen if all status information cannot be seen in one
screen.
OLT2406 User's Guide
323
Advertisement
Table of Contents
Troubleshooting
