Table of Contents
Advertisement
Table 229 AAA Commands (continued)
COMMAND
aaa accounting exec <start-
stop|stop-only>
<radius|tacacs+> [broadcast]
aaa accounting system
<radius|tacacs+>
aaa accounting system
<radius|tacacs+> [broadcast]
aaa accounting update periodic <1-
2147483647>
aaa authentication enable
<method1> [<method2>...]
aaa authentication login <method1>
[<method2>...]
aaa authorization dot1x radius
aaa authorization exec
<radius|tacacs+>
no aaa accounting commands
no aaa accounting dot1x
no aaa accounting exec
no aaa accounting system
no aaa accounting update
no aaa authentication enable
no aaa authentication login
no aaa authorization dot1x
no aaa authorization exec
show aaa accounting
DESCRIPTION
Enables accounting of administrative sessions
via SSH, Telnet and console port and specifies
the mode and protocol method.
Sends accounting information for administrative
sessions via SSH, Telnet and console port to all
configured accounting servers at the same
time.
Enables accounting of system events and
specifies the protocol method.
Enables accounting of system events and
specifies the protocol method.
Sends accounting information for system events
to all configured accounting servers at the same
time.
Sets the update period (in minutes) for
accounting sessions. This is the time the OLT waits
to send an update to an accounting server after
a session starts.
Specifies which method should be used first,
second, and third for checking privileges.
:
method
enable
Specifies which method should be used first,
second, and third for the authentication of login
accounts.
:
method
enable
Enables authorization for IEEE 802.1x clients using
RADIUS.
Specifies which method (
should be used for administrator authorization.
Disables accounting of command sessions on
the OLT.
Disables accounting of IEEE 802.1x
authentication sessions on the OLT.
Disables accounting of administrative sessions
via SSH, Telnet or console on the OLT.
Disables accounting of system events on the
OLT.
Resets the accounting update interval to the
default value.
Resets the method list for checking privileges to
its default value.
Resets the method list for the authentication of
login accounts to its default value.
Disables authorization of allowing an IEEE 802.1x
client to have a different bandwidth limit or
VLAN ID assigned via the external server.
Disables authorization of allowing an
administrator which logs into the OLT through
Telnet or SSH to have a different access privilege
level assigned via the external server.
Displays accounting settings configured on the
OLT.
OLT2406 User's Guide
462
,
, or
.
radius
tacacs+
,
, or
.
radius
tacacs+
or
radius
tacacs+
M
P
C
13
C
13
C
13
C
13
C
14
C
14
C
14
)
C
14
C
13
C
13
C
13
C
13
C
13
C
14
C
14
C
14
C
14
E
3
Advertisement
Table of Contents
Troubleshooting
