Example - Enabling Ipv6 On Windows Xp/2003 - ZyXEL Communications OLT2406 User Manual

55.4 Example - Enabling IPv6 on Windows XP/2003

By default, Windows XP and Windows 2003 support IPv6. This example shows you how to use the ipv6
install command on Windows XP/2003 to enable IPv6. This also displays how to use the ipconfig
command to see auto-generated IP addresses.
C:\>ipv6 install
Installing...
Succeeded.
C:\>ipconfig
Windows IP Configuration
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix
IP Address. . . . . . . . . . . . : 10.1.1.46
Subnet Mask . . . . . . . . . . . : 255.255.255.0
IP Address. . . . . . . . . . . . : fe80::2d0:59ff:feb8:103c%4
Default Gateway . . . . . . . . . : 10.1.1.254
Tunnel adapter Teredo Tunneling Pseudo-Interface:
Connection-specific DNS Suffix
IP Address. . . . . . . . . . . . : fe80::5445:5245:444f%5
Default Gateway . . . . . . . . . :
Tunnel adapter Automatic Tunneling Pseudo-Interface:
Connection-specific DNS Suffix
IP Address. . . . . . . . . . . . : fe80::5efe:10.1.1.46%2
Default Gateway . . . . . . . . . :
IPv6 is installed and enabled by default in Windows Vista. Use the "ipconfig" command to check your
automatic configured IPv6 address as well. You should see at least one IPv6 address available for the
interface on your computer.
. :
. :
. :
OLT2406 User's Guide
439