Troubleshooting; How To Use Vlan Stacking On Pon Ports; Apply Vlan Stacking To All Vlans - ZyXEL Communications OLT2406 User Manual

Figure 54 Tutorial: Set DHCP Server and Relay Information
Click the Save link in the upper right corner of the web configurator to save your configuration
5
permanently.
The DHCP server can then assign a specific IP address based on the DHCP request.
6

6.3.4 Troubleshooting

Check the client A's IP address. If it did not receive the IP address 172.16.1.18, make sure:
Client A is connected to the OLT's port 2 in VLAN 102.
1
You configured the correct VLAN ID, port number and system name for DHCP relay on both the DHCP
2
server and the OLT.
You clicked the Save link on the OLT to have your settings take effect.
3

6.4 How to Use VLAN Stacking on PON Ports

This tutorial introduces how to configure VLAN stacking for all VLANs and specified VLAN on PON ports.

6.4.1 Apply VLAN Stacking to All VLANs

Scenario
PC2 transmits untagged VLAN traffic to Switch 1. Switch 1 adds the VLAN tag and forwards the tagged
packets to the ONT. The ONT forwards the tagged packets that are VLAN members on the UNI port to
the OLT. The OLT receives the single-tagged packets from multiple VLANs. The OLT will add an outer tag
(2001) to the incoming packets and forward the double-tagged packets to the uplink.
The OLT will only process the outer VLAN ID (2001). All inner VLAN IDs will be transparent in the OLT
forwarding process.
Chapter 6 Tutorials
OLT2406 User's Guide
83