How To Use Vlan Stacking On Onts; Apply Vlan Stacking To All Vlans - ZyXEL Communications OLT2406 User Manual

Figure 56 Tutorial: VLAN Stacking for All VLANs on PON Ports
Create the VLAN in the OLT and assign member ports.
1
(config)# vlan 2001
(config-vlan)# fixed ge-5-1
(config-vlan)# fixed msc-1-1
(config-vlan)# exit
Configure VLAN translation on a UNI port of the OLT.
2
# configure
(config)# interface uni-port pon-5-1
(config-uniport)# vlan-translation name vlan45to2001:45 ing-ovid 45 egr-svid
2001 egr-cvid 45
(config-uniport)# vlan-translation

6.5 How to Use VLAN Stacking on ONTs

This tutorial introduces how to configure VLAN stacking for all VLANs and specified VLAN on the ONTs
connected to the PON ports.

6.5.1 Apply VLAN Stacking to All VLANs

Scenario
PC2 transmits untagged VLAN traffic to Switch 1. Switch 1 adds the VLAN tag and forwards the tagged
packets to the ONT.
The ONT receives the single-tagged packets from multiple VLANs. The ONT verifies that the single-
tagged packets are the VLAN members on the UNI port. The ONT will add an outer tag (2001) to the
incoming packets and forward the double-tagged packets to the OLT.
The OLT will only process the outer VLAN ID (2001). All inner VLAN IDs will be transparent in the OLT
forwarding process.
Chapter 6 Tutorials
OLT2406 User's Guide
85